Operating instructionsEE300Ex SeriesHUMIDITY / TEMPERATURETRANSMITTERFor Intrinsically Safe ApplicationsBA_EE300EX_e // v1.7 / Technical data subject
102.4 Housing and probe dimensionsL15 (0.6“)15 (0.6“)15 (0.6“)15 (0.6“)L12 (0.47“)12 (0.47“)Ø12 (0.47“)Ø13 (0.51“)LCable length acc. to order codeCab
1170 (2.8“)Cable length acc. to order codeSingle-sided screw connection 1/2" ISO or NPTWall mounting temperature - xT modelRemote sensing probe t
123. INSTALLATION IN AN EXPLOSION HAZARD AREA3.1 GeneralThe EE300Ex has been certified in accordance with the ATEX 94/9EC Directive, IECEX Scheme, ,
133.2 Housing assemblyThe EE300Ex housing has a two-part construction.• Lower housing section with the connection and earthing terminals.• Upper ho
143.3 Assembly in category 1 (zone 0 / 20); Division 1Only intrinsically safe power supply devices are approved to supply EE300Ex in category 1 or Di
154-20mA ia4-20mA ia+-L+L-+-+-+-+-CH2CH13.4 Assembly in categories 2 and 3 (Zone 1 2 / 21 22), Division 2Only intrinsically safe power supply devic
16Mechanical ambient conditionsWhen installing the sensor, the mechanical influences of the installation site should be taken into account. (e.g. vibr
17Installation instructions:• Tighten the union nuts finger-tight.• Mark the union nuts at the 6 o' clock position.• Hold the screw connection
183.5.3 Mounting the probe using ball valve (optional)With ball valve mounting, the system being meas-ured does not need to be emptied or brought to
19Swagelok-union nutprotective coverSwagelok-ttingcopper sealing3.5.4 Mounting the probe using sensor retraction tool (optional)Observe the operatin
2The operating instructions form part of the equipment supplied and are used to ensure optimal operation and functioning of the device.E+E Elektronik®
203.6 Calculation of the maximum cable lengthIntrinsically safe power supply device STAHL 9160/13-11-11 (order code HA011405)Technical data for EE30
21Technical data for connecting cable Cable type: ÖLFLEX® EB CY from manufacturer Lapp Kabel Cable cross-section: 4 x 0.75mm² (0.06x0.01in²) Op
224.1 Connecting cableA shielded cable should be used. The shield should be laid on one side with the EE300Ex.The cable must conform to the following
234.3 Configuration adapterThe digital interface is used only for device configuration and customer adjustment.The configurator software and the driv
24SICHERER BEREICHEXPLOSIONSGEFÄHRDETERBEREICHErdung der BarrierenZentrale ErdungInstrument SystemSicherheits-barriere oderSpeisegerätErdeCH1 +CH1 -CH
255. DISPLAY (OPTIONAL)Measured valuesUnitsMeasured values selection top rowMeasured valuesMeasured values selection bottom row+-L+L-+-+-CH2CH14-20mA
266. MAINTENANCEIt is essential that operation and maintenance in explosion hazard areas are only carried out by trained specialist personnel authori
277. TECHNICAL DATA - EE300EX-HTMeasuring values Relative humidity Humidity sensor1) HC1000 Measuring range1) 0...100% RH Accuracy2) (including hy
288. TECHNICAL DATA - EE300EX-xTMeasuring values Temperature Temperature sensor Pt1000 (Tolerance class A, DIN EN 60751) Measuring range sensor he
299. ATEX CERTIFICATE
3Contents1. GENERAL NOTES 41.1 Explanation of symbols 41.2 Safety instructions 41.2.1 General safety instructions 41.3 Environmental aspects
33
3410. EC DECLARATION OF CONFORMITY
3511. IECEX CERTIFICATE OF CONFORMITY - COC
36
37
38
3912. FM CERTIFICATE USA
41.1 Explanation of symbolsThis symbol indicates safety information. It is essential that this safety information is followed. The manufacturer accep
40
41
42
43
45
4613. FM CERTIFICATE CANADA
47
48
49
52. TECHNICAL DESCRIPTION2.1 GeneralThe entire EE300Ex transmitter can be installed directly in the explosion hazard area.The EE300Ex is the ideal tr
51
52
5314. CONTROL DRAWING M1_1309080
54
55PCPC
HEAD OFFICE:E+E ELEKTRONIK Ges.m.b.H.Langwiesen 7A-4209 EngerwitzdorfAustriaTel: +43 7235 605 0Fax: +43 7235 605 [email protected] O
62.2 EE300Ex labeling Each EE300Ex is only characterized for one certificate. The Ordering Code on the Product label shows the type of the Ex Certifi
7EUROPE:The EE300Ex transmitter fulfils the ATEX Directives on intrinsically safe operating equipment.Applied standards for ATEX: • EN 1127-1:2011•
8USA:Applied Standard for the U.S. NEC 500, NEC505 and 506: • FM Class 3600 2011 • FM Class 3610 2010 • FM Class 3611 2004• FM Class 3810 2
9Canada:Applied Standard for Canada CEC Section 18 and Annex J:• CSA 22.2 No. 0-M91 2006 • CSA 22.2 No. 61010-1 2004 • CSA 22.2 No. 157 2006 •
Comments to this Manuals